Page 17 - HancockClassics2019_forweb
P. 17

BECOMES THE PROBLEM


        QUESTIONABLE SOLUTION - When looking at the NFRC label, it’s important to remember that a window’s overall thermal
        performance is the result of all its contributing factors, and that frequently an adjustment to one area can have undesirable
        effects in another. For example, it’s easy to reduce the unit’s U-Factor by applying additional layers of Low-e glass. However,
        this would also have the undesirable effect of reducing both VT and SHGC, so it’s important to maintain a balance in all areas.

        One particular measurement of importance to people in the cold
        Northern climate zones is the unit’s Condensation Resistance Factor
        (CRF), since the accumulation of excessive condensation can be
        particularly detrimental not only to the building’s structure, but to
        the indoor air quality as well. Since this number (which ranges from
        1 - 100) is not required to be reported, most  architects, building
        professionals and homeowners are unaware of its existence, much less
        its importance.

        Unfortunately, in order to meet Energy Star  6.0, some manufacturers
                                           ®
        have chosen to resort to so-called "Surface 4" or "roomside" Low-e
        glazing. Under this technique, an additional layer of low-E coating
        is placed on Surface 4 (S4) of the glass of a traditional improved IG
        (generally, low-E and argon fill).

        According to industry experts, the science behind S4 results in a
        higher risk of condensation in cold weather because the Low-e coating
        reduces radiant heat transfer from the room to the glass surface. While
        this does improve the window U-factor by about 0.03, ultimately the
        room-side glass is cooler, which increases the chance of an excess
        of water vapor condensing on the glass surface, which can result in
        sheetrock damage, peeling paint or mold growth.

        This is the unintended, yet potentially dangerous consequence of S4
        glazing: a dramatic reduction in the CRF, with a resulting increase in
        condensation on interior glass surfaces, and the subsequent damage
        that results.

        PROTECT YOUR HOME, PROTECT YOUR FAMILY - How can you be sure the window you are specifying or installing has the
        recommended CRF for your climate zone? What is the recommended CRF for your climate zone?

        According to both the American Architectural Manufacturers Association (AAMA) and NFRC, for the cold Northern climate
        zone, windows should have a CRF of at least 50. This will provide a sufficiently warm roomside glass surface to resist moisture.
        Even with a CRF above 50, windows in highly humid areas of the home (kitchens and bathrooms) may show some occasional
        condensation,  as  may  other  windows  in  the  home  during  the  seasonal  transition  from  Summer  to  Autumn.  This  type  of
        condensation should not be a cause for alarm. What should be a cause for alarm would be continuous, daily, uncontrollable
        condensation.

        But how can you find the CRF it’s not on the NRFC label? First: ask the
        manufacturer, as they are able to provide this information to you. Or you can
        find our for yourself by visiting www.NFRC.org, hover over "Consumers" in the
        top menu bar, then click on "Search for a Fenestration Product". This will pull
        up a search tool, with which you can search by manufacturer, window type, as
        well as by minimum U-Factors, SCGC and VT. Included in all reports is the    Condensation Resistance
        unit's CRF.

                                                                 ®
        Better yet: ask them if they use S4 glazing in order to meet Energy Star  6.0. If   If it’s important enough to measure,
        they are, then chances are the CRF for that unit may not be the best choice to   it’s important enough to report.
        protect your home, and protect your family.
           We’ve  all  seen  it:  interior  window  condensation  forming  on  cold  days.  Under  Energy  Star
                                                                      ®
           6.0  performance  standards,  many  window  manufacturers  are  making  choices  that  will
           actually  increase interior condensation to levels that may prove to be costly to homeowners.
           For this reason, Mathews Brothers advocates the display of the CRF on the NFRC Window Label.


      BECOMES THE PROBLEM                                                                      hancocklumber.com    17
   12   13   14   15   16   17   18   19   20   21   22